What Is App-Defined Radio? | Official VGC Explainer
2026-11-18

Vero Telecom / VGC N-Series

What Is App-Defined Radio?

If you sell or install VGC N-Series radios, this is the short version: you program them from a phone, over Bluetooth, without a PC cable.

The idea

What the term means

App-Defined Radio, or ADR, is VGC’s term for programming and looking after N-Series radios from a smartphone. Instead of a programming cable and a desktop CPS session, a technician works in the VGC HT App over Bluetooth. In its Anytone vs Baofeng vs VGC comparison guide, Vero Telecom (VGC) calls itself a pioneer of App-Defined Radio.

On models that support it, a channel plan can start in a spreadsheet, move to the phone, and go out to the radios over Bluetooth. Some of those models can also take official firmware the same way, over the air, through the app.

“App-Defined Programming: Total hardware control via Bluetooth. Deploy complex relay and frequency configurations in seconds without a PC.”

From the vgc-tech.com homepage

Programming

How programming works

The HT App is available for iOS and Android. QR codes and a download link are on the homepage.

Once the phone and the radio are paired over Bluetooth, a technician can write channels, copy settings, and send a prepared plan to the radio without opening a laptop.

For the VR-N76 and VR-N7600, the comparison guide walks through the job: field technicians can build a channel matrix in CSV or JSON, sync it to a phone over Bluetooth, and push the setup to dozens of radios in seconds. That guide also says VGC does away with programming cables entirely on those two models, and that they support native Bluetooth SPP/BLE and cableless OTA fleet deployment.

Spreadsheet import is documented on some models, not all of them. The VR-N76 product page, and the comparison guide, talk about wireless JSON or CSV cloning. The VR-N7100 page puts it this way: “Utilize Batch Cloning via Proximity Sync or import channel databases through standardized CSV files.”

Pairing steps and App-Defined Radio instructions are in the HT APP Full Manual, along with setup guides for the VR-N76, VR-N7600, VR-N7500, BHM-79, and BHM-88, all in the Download Center.

The line

The N-Series radios

The N-Series is two handhelds and three mobiles, plus Bluetooth accessories. The notes below follow each model’s product page, so they are not the same across the line.

VR-N76 — Dual-band handheld

This is the dual-band handheld most often used to explain the system: a 5W VHF/UHF radio, programmed in the HT App, with a hardware KISS TNC, IP67 rating, 192 channels, and wireless JSON/CSV cloning. Firmware updates go out over the air, so units do not have to be called back in.

VR-N75 — UHF handheld

A UHF 400–470 MHz handheld with app programming, IP67, Bluetooth 5.0, APRS through the HT App, and OTA firmware sync. VGC’s own note on that page is straightforward: the N75 is UHF-only with a half keypad; the N76 is dual-band with a full keypad; both support APRS and OTA.

VR-N7600 — 50W dual-band mobile

A 50W dual-band mobile with app programming, a built-in KISS TNC, and APRS mapping on the full-color LCD command mic. It can be hidden in the vehicle and controlled from the HT App or that color microphone. The product page also lists AI noise reduction.

VR-N7500 — Headless mobile

A 50W VHF / 40W UHF mobile meant to be mounted under a seat or in a trunk, then controlled from a phone or another Bluetooth terminal. It has a built-in KISS TNC, a RoIP gateway, HT App programming, and OTA firmware updates.

VR-N7100 — UHF 50W mobile

A rugged single-band UHF 50W mobile with Dual-Mode Bluetooth 5.0 for wireless programming and peripherals. The product page says you can batch-clone units with Proximity Sync, or import channel databases from standardized CSV files, without a PC.

Accessories

On the VR-N76 page, the matching accessories are the BHM-88 display microphone, the BHM-79 industrial wireless audio unit, and the BS-PTT ring or velcro PTT. The BHM-88 can handle frequencies and coordinates even when it is not tied to the main radio. Setup guides for the BHM-79 and BHM-88 are in the Download Center.

For buyers

Why it matters when you are buying

If you distribute these radios, or you run a fleet, the practical question is what happens after the shipment leaves the factory.

On models that support it, you can build the fleet plan in a spreadsheet, get it onto a phone, and push it over Bluetooth. No programming cable on the bench, and none in the field. The comparison guide talks about sending setup parameters to dozens of radios in seconds.

Firmware can work the same way, again where the model supports it. The VR-N76 already has published releases on the site: official stable release v0.9.3-7 was delivered through the VERO HT App, and the radio needs at least 30% battery before the wireless upgrade. The later v0.9.6-2 release is also on the site.

On some models, that same Bluetooth path is also a data link. The VR-N76, VR-N7600, and VR-N7500 include a hardware KISS TNC. The comparison guide notes that a hardware TNC can connect over Bluetooth to mapping software such as ATAK, APRSdroid, or WoAD.

If you need OEM or ODM work — custom firmware branding, frequency caps, pre-loaded talk groups, startup graphics, or case silk-screen — that goes through Custom Development or Contact. Protocol interface logs are offered to verified dealers and engineering firms, and a full SDK is available under NDA to verified enterprise buyers.

Scope

What this does not cover

App-Defined Radio is how the N-Series is programmed and maintained. It does not mean every VGC radio has left the computer behind. The Download Center still carries CPS software for other models, including the VR-6600PRO, VR-6900, VR-F90, and DM-1801.

If you are comparing programming methods across brands, use the existing comparison guide. This page is here to explain ADR, not to retell that comparison.

Questions

FAQ

What is App-Defined Radio?

App-Defined Radio, or ADR, is how VGC N-Series radios are programmed and looked after from the HT App over Bluetooth, without a PC programming cable. On supported models, that includes CSV or JSON channel import and over-the-air firmware updates.

Which radios are in the N-Series?

The handhelds are the VR-N76 and VR-N75. The mobiles are the VR-N7600, VR-N7500, and VR-N7100. Accessories are the BHM-88, BHM-79, and BS-PTT. A hardware KISS TNC is listed for the VR-N76, VR-N7600, and VR-N7500; it is not listed on the VR-N75 or VR-N7100 product pages.

Can we import a channel list from a spreadsheet?

On some models, yes. The VR-N76 product page and the comparison guide describe JSON and CSV plans sent over Bluetooth. The VR-N7100 page says channel databases can be imported through standardized CSV files; it does not mention JSON. The HT APP Full Manual in the Download Center has the procedure.

How are official firmware updates delivered?

On models that support it, official firmware is updated over the air, through the HT App, over Bluetooth. The VR-N76 has two public stable releases, v0.9.3-7 and v0.9.6-2. The v0.9.3-7 announcement says the radio needs at least 30% battery before the wireless upgrade.

How do we ask about OEM, ODM, or becoming a distributor?

Use the Custom Development page, or email info@verotelecom.com. Technical support is +86-595-2249 6660. The Contact page mentions work such as VR-N76 firmware or App-Defined Radio setup.

Inquire

Where to go next

The product pages above are the best next stop for specifications. The HT APP Full Manual is in the Download Center. For OEM, ODM, or a distributor relationship, use Custom Development or Contact VGC.

Email: info@verotelecom.com. Technical support: +86-595-2249 6660. Address: No.4 Chongmin St, Quanzhou Economic & Technological Development Zone, Fujian, P.R.C 362005.

>> VR-N76 Firmware v0.9.6-2 | Official Stable Release | VGC